Nitrogen, ammonia and ammonium salts

The structure and properties of nitrogen, making ammonia in the laboratory and in industry, its basic and reducing properties (including catalytic oxidation), ammonium salts, the test for NH₄⁺ and the nitrogen oxides — with DİM-style tasks on limiting reagents, gas mixtures and n(t) graphs.

  • Grade 9
  • 25 min
  • 12 questions
  • Lesson 17 of 45

In this lesson you will learn

  • Explain the structure of the nitrogen atom, the triple bond in N₂ and the oxidation states of nitrogen from −3 to +5.
  • Write equations for making nitrogen and ammonia and for their chemical properties, including catalytic oxidation.
  • Know the properties and thermal decomposition of ammonium salts and the test for NH₄⁺, and compare the nitrogen oxides.
  • Solve limiting-reagent, yield, mean-molar-mass and n(t)-graph tasks on the reaction N₂ + 3H₂ ⇌ 2NH₃.

About 78 % of the air we breathe (by volume) is nitrogen, yet plants cannot use it directly — they need ammonium and nitrate ions. Household ammonia, the ammonium nitrate in fertilisers and the liquid ammonia in industrial refrigerators are all nitrogen compounds. The 2026 DİM exams had three tasks on nitrogen and ammonia: finding an element from the formulas HXO₃ and XH₃, the limiting reagent in N₂ + H₂, and an n(t) graph of a gas mixture. Nitric acid and phosphorus have lessons of their own.

Nitrogen: the atom and the N₂ molecule

Nitrogen (N, Z = 7) is the first element of group VA, the nitrogen subgroup (N, P, As, Sb, Bi): 1s²2s²2p³, five outer electrons, three of them unpaired. Its higher oxide has the formula type R₂O₅ (N₂O₅), its hydrogen compound RH₃ (NH₃) and its higher acid HRO₃ (HNO₃) — that is why DİM asks “in HXO₃ and XH₃, which element can X be?”. Nitrogen is in period 2 and has no d-sublevel, so its highest valence is IV (in the NH₄⁺ ion and in HNO₃), while its highest oxidation state is +5.

Oxidation stateExamplesRedox behaviour
−3NH₃, NH₄Cl, Mg₃N₂reducing agent only
0N₂both oxidising and reducing
+1, +2, +3, +4N₂O, NO, HNO₂, NaNO₂, NO₂both oxidising and reducing
+5N₂O₅, HNO₃, KNO₃oxidising agent only

In the N₂ molecule the atoms are joined by a triple bond: N≡N — one σ- and two π-bonds, i.e. 3 shared electron pairs, 6 electrons in the bond. The bond energy is very large (946 kJ/mol), so nitrogen is unreactive under ordinary conditions. Nitrogen is a colourless, odourless gas, slightly lighter than air (28 < 29) and poorly soluble in water; it boils at −196 °C. Industry gets it by fractional distillation of liquid air, the laboratory by heating ammonium nitrite: NH₄NO₂ → N₂↑ + 2H₂O.

  • As an oxidising agent (N⁰ → N⁻³): with lithium at room temperature 6Li + N₂ → 2Li₃N, with magnesium on heating 3Mg + N₂ → Mg₃N₂, with hydrogen over a catalyst at high pressure N₂ + 3H₂ ⇌ 2NH₃. Nitrides are decomposed by water: Mg₃N₂ + 6H₂O → 3Mg(OH)₂ + 2NH₃↑.
  • As a reducing agent (N⁰ → N⁺²): it reacts with oxygen only in an electric discharge, at about 2000 °C: N₂ + O₂ ⇌ 2NO, an endothermic reaction. Lightning makes NO in the air in this way.
  • The nitrogen cycle: NO from lightning turns into nitrates, nodule bacteria of legumes fix N₂, plants build nitrogen into proteins, and decay and bacteria return it as NH₃ and N₂.

Exam style: statements about nitrogen (coded task)

Problem

Choose the true statements about nitrogen.
1. Six electrons form the bonds in the N₂ molecule
2. The N₂ molecule has two σ-bonds and one π-bond
3. The highest valence of nitrogen is V
4. It reacts with lithium at room temperature
5. With oxygen in an electric discharge it forms nitrogen(II) oxide

Show solutionHide solution

Solution

1 — true: N≡N, three shared pairs = 6 electrons.
2 — false: a triple bond is one σ + two π.
3 — false: a period-2 element has no d-orbitals, so the highest valence is IV (the oxidation state can still be +5).
4 — true: 6Li + N₂ → 2Li₃N. 5 — true: N₂ + O₂ ⇌ 2NO.
Answer: 1, 4, 5.

Sign up free to keep reading

The rest of the lesson, the quiz and your notes open with an Educora account. Signing up takes a minute, and your progress is saved on all your devices.

Ammonia: preparation and structure

In the laboratory ammonia is made by heating a solid mixture of an ammonium salt and slaked lime: 2NH₄Cl + Ca(OH)₂ → CaCl₂ + 2NH₃↑ + 2H₂O. Ammonia is lighter than air (17 < 29), so it is collected in an upside-down vessel and dried with CaO or solid NaOH. Industry synthesises it by the Haber–Bosch process: N₂ + 3H₂ ⇌ 2NH₃ + 92 kJ. The reaction is reversible and exothermic and the gas volume decreases (4 volumes → 2 volumes), so by Le Chatelier’s principle high pressure (15–30 MPa) shifts the equilibrium towards ammonia. At low temperature the rate drops, so 450–500 °C and an iron catalyst are used; NH₃ is cooled and removed as a liquid, and unreacted N₂ and H₂ are sent back (recycling).

In the NH₃ molecule the nitrogen atom is sp³-hybridised: three N–H σ-bonds and one lone electron pair; the molecule is a trigonal pyramid (angle ≈ 107°) and is polar. Hydrogen bonds between the molecules make ammonia easy to liquefy (−33 °C), so it is used as a refrigerant. Ammonia is extremely soluble in water — about 700 volumes in 1 volume of water at 20 °C (the “fountain” experiment). The household ammonia sold in pharmacies is a 10 % solution of ammonia in water.

Δn = n₁ − n₂ = n(NH₃) = 2 · n(N₂)ᵣ = (2/3) · n(H₂)ᵣΔn = n₁ − n₂ = n(NH₃) = 2 · n(N₂)ᵣ = (2/3) · n(H₂)ᵣ

Where

n₁, n₂
total amount of the gas mixture before and after the reaction, mol (or its volume, L)
n(N₂)ᵣ, n(H₂)ᵣ
amounts of nitrogen and hydrogen that have reacted, mol

N₂ + 3H₂ → 2NH₃: every 4 mol of gas are replaced by 2 mol, so the decrease of the mixture equals the amount of ammonia formed.

100800t₁n, molt, sall gases
An n(t) graph: the decrease 100 − 80 = 20 mol is the amount of NH₃ formed.

Exam style: the n(t) graph of a gas mixture

Problem

A closed vessel contained 25 mol of N₂ and 75 mol of H₂. By the graph, the total amount of gas at time t₁ is 80 mol. How many moles of H₂ reacted by t₁, what is the mole fraction of ammonia (%) and what fraction of the nitrogen has reacted (%)?

Show solutionHide solution

Solution

Δn = 100 − 80 = 20 mol → n(NH₃) = 20 mol, n(N₂)ᵣ = 10 mol, n(H₂)ᵣ = 1.5 · 20 = 30 mol.
At t₁: N₂ 25 − 10 = 15 mol, H₂ 75 − 30 = 45 mol, NH₃ 20 mol (80 mol in total ✓).
Mole fraction of NH₃: 20 / 80 · 100% = 25%; nitrogen reacted: 10 / 25 · 100% = 40%.
n₂ / n₁ = p₂ / p₁ = M̄₁ / M̄₂n₂ / n₁ = p₂ / p₁ = M̄₁ / M̄₂

Where

n₁, n₂
total amount of gas before and after the reaction, mol
p₁, p₂
pressure in a closed vessel (at constant V and T)
M̄₁, M̄₂
mean molar mass of the mixture, g/mol: M̄ = 2 · D(H₂)

The mass of the gases does not change in the reaction (m = n · M̄ = const), so as the amount falls the mean molar mass rises.

Calculation: density relative to hydrogen

Problem

A mixture of N₂ and H₂ has a density relative to hydrogen of 4.25. After passing over a catalyst the new mixture has a density relative to hydrogen of 5. Calculate the volume fraction of nitrogen in the original mixture and the yield of ammonia (%).

Show solutionHide solution

Solution

M̄₁ = 2 · 4.25 = 8.5. Fraction of nitrogen x: 28x + 2(1 − x) = 8.5 → 26x = 6.5 → x = 0.25 (25%), i.e. N₂ : H₂ = 1 : 3.
M̄₂ = 2 · 5 = 10 → n₂ / n₁ = 8.5 / 10 = 0.85. Per 1 mol of mixture: Δn = 0.15 mol = n(NH₃).
Theoretical: 0.25 mol N₂ → 0.5 mol NH₃ → yield = 0.15 / 0.5 · 100% = 30%.

Chemical properties of ammonia

Ammonia has two “faces”. Thanks to its lone electron pair it attaches an H⁺ ion and behaves as a base; and its nitrogen is in the lowest oxidation state (−3), so in redox reactions ammonia is only a reducing agent. In NH₃ + H⁺ → NH₄⁺ the bond forms by the donor–acceptor mechanism: nitrogen gives its electron pair to the empty orbital of H⁺; the four N–H bonds in NH₄⁺ are identical and nitrogen has valence IV.

  • With water: NH₃ + H₂O ⇌ NH₃·H₂O ⇌ NH₄⁺ + OH⁻ — a weak base; the solution turns phenolphthalein crimson and red litmus blue.
  • With acids it forms ammonium salts: NH₃ + HCl → NH₄Cl (white “smoke”), 2NH₃ + H₂SO₄ → (NH₄)₂SO₄, NH₃ + H₂SO₄ → NH₄HSO₄, NH₃ + HNO₃ → NH₄NO₃. With carbon dioxide under high pressure it gives urea: 2NH₃ + CO₂ → (NH₂)₂CO + H₂O.
  • With oxygen: without a catalyst it burns — 4NH₃ + 3O₂ → 2N₂ + 6H₂O; over a platinum catalyst (≈ 800 °C) catalytic oxidation takes place — 4NH₃ + 5O₂ → 4NO + 6H₂O. The second reaction is the first stage of nitric acid production.
  • With other oxidising agents: on heating it reduces copper(II) oxide to copper — 2NH₃ + 3CuO → 3Cu + N₂ + 3H₂O; with chlorine 2NH₃ + 3Cl₂ → N₂ + 6HCl.

Exam style: a transformation scheme

Problem

Identify X, Y and Z in the scheme.
Mg₃N₂ →(+H₂O) X →(+CuO, t) Y →(+Li) Z →(+H₂O) X
A) NH₃; NO; Li₃N
B) NH₃; N₂; Li₃N
C) N₂; NH₃; LiNO₃
D) NH₃; N₂; LiNH₂
E) HNO₃; NO; Li₃N

Show solutionHide solution

Solution

Mg₃N₂ + 6H₂O → 3Mg(OH)₂ + 2NH₃↑ — X = NH₃.
2NH₃ + 3CuO → 3Cu + N₂ + 3H₂O — ammonia is the reducing agent, Y = N₂ (NO forms from ammonia only with oxygen over Pt).
6Li + N₂ → 2Li₃N — Z = Li₃N; Li₃N + 3H₂O → 3LiOH + NH₃↑ — X again.
Answer: B.

Ammonium salts and the test for NH₄⁺

Ammonium salts are ionic crystalline substances; they dissolve well in water and dissociate completely. But they are salts of a weak base: their solutions are acidic because of hydrolysis (see “Electrolytic dissociation, ion-exchange reactions and hydrolysis of salts”). Test for NH₄⁺: add an alkali to the salt and heat — NH₄Cl + NaOH → NaCl + NH₃↑ + H₂O, net ionic equation NH₄⁺ + OH⁻ → NH₃↑ + H₂O. Ammonia is recognised by its smell, by damp red litmus paper turning blue and by white “smoke” near a glass rod dipped in concentrated HCl.

SaltOn heatingType of reaction
NH₄ClNH₄Cl ⇌ NH₃↑ + HCl↑not redox; the gases recombine to NH₄Cl on the cold part of the tube (looks like sublimation)
(NH₄)₂CO₃(NH₄)₂CO₃ → 2NH₃↑ + CO₂↑ + H₂Onot redox; no residue is left
NH₄HCO₃NH₄HCO₃ → NH₃↑ + CO₂↑ + H₂Onot redox; a raising agent for dough
NH₄NO₃NH₄NO₃ → N₂O↑ + 2H₂Ointramolecular redox: N⁻³ → N⁺¹, N⁺⁵ → N⁺¹
NH₄NO₂NH₄NO₂ → N₂↑ + 2H₂Ointramolecular redox: N⁻³ → N⁰, N⁺³ → N⁰
Thermal decomposition of ammonium salts: if the anion is not an oxidising agent, NH₃ is released; if it is (NO₃⁻, NO₂⁻, Cr₂O₇²⁻), the ammonium nitrogen is oxidised.

Uses: NH₄Cl (sal ammoniac) — soldering and dry cells; NH₄NO₃ (ammonium nitrate) and (NH₄)₂SO₄ — nitrogen fertilisers (the calculations are in “Chemistry in everyday life and industry”); NH₄HCO₃ — a raising agent for dough.

Exam style: equal masses of ammonium salts (table)

Problem

Equal masses (m g) of the salts were heated with excess alkali:
NH₄Cl — m g — V₁ L of NH₃
(NH₄)₂SO₄ — m g — V₂ L of NH₃
NH₄NO₃ — m g — V₃ L of NH₃
Choose the correct relation between V₁, V₂ and V₃. Mr(NH₄Cl) = 53.5, Mr((NH₄)₂SO₄) = 132, Mr(NH₄NO₃) = 80
A) V₁ = V₂ = V₃ B) V₂ > V₁ > V₃ C) V₃ > V₂ > V₁ D) V₁ > V₂ > V₃ E) V₂ > V₃ > V₁

Show solutionHide solution

Solution

Each NH₄⁺ ion gives one NH₃: NH₃ from 1 g of salt = (number of NH₄⁺ ions) / M.
NH₄Cl: 1 / 53.5 ≈ 0.0187; (NH₄)₂SO₄: 2 / 132 ≈ 0.0152; NH₄NO₃: 1 / 80 = 0.0125 (mol/g).
V₁ > V₂ > V₃ — answer: D.

Nitrogen oxides

OxideOxidation state of NPropertiesType
N₂O+1colourless gas with a sweetish smell (“laughing gas”), used in anaesthesia, supports burningnon-salt-forming
NO+2colourless, poorly soluble in water, oxidised at once in air: 2NO + O₂ → 2NO₂non-salt-forming
N₂O₃+3blue liquid (at low temperature): N₂O₃ + H₂O → 2HNO₂acidic oxide
NO₂+4brown, pungent, toxic gas; dimerises in the cold: 2NO₂ ⇌ N₂O₄ (colourless)gives two acids with water
N₂O₅+5colourless crystals: N₂O₅ + H₂O → 2HNO₃acidic oxide

In NO₂ nitrogen is in an intermediate oxidation state (+4), so with water and alkalis it disproportionates: 2NO₂ + H₂O → HNO₃ + HNO₂; 2NO₂ + 2NaOH → NaNO₃ + NaNO₂ + H₂O; with soda 2NO₂ + Na₂CO₃ → NaNO₃ + NaNO₂ + CO₂↑. When oxygen is present only nitric acid forms: 4NO₂ + O₂ + 2H₂O → 4HNO₃ — the last stage of the industrial process.

Calculation: nitrogen oxides

Problem

20 mL of NO was mixed with 15 mL of O₂. Calculate the volume of the gas mixture formed (mL), the volume fraction of NO₂ (%) and the density of the mixture relative to hydrogen (ignore the dimerisation of NO₂; all volumes under the same conditions). Mr(NO₂) = 46, Mr(O₂) = 32

Show solutionHide solution

Solution

2NO + O₂ → 2NO₂: 20 mL of NO uses 10 mL of O₂ and gives 20 mL of NO₂; 15 − 10 = 5 mL of O₂ is left over.
V = 20 + 5 = 25 mL; φ(NO₂) = 20 / 25 · 100% = 80%.
M̄ = 0.8 · 46 + 0.2 · 32 = 43.2 g/mol → D(H₂) = 43.2 / 2 = 21.6.

Interactive

Loading simulation…
Find the oxidation state of nitrogen: at −3 it can only give electrons, at +5 it can only accept them.

Remember

  • Nitrogen (2s²2p³) shows oxidation states from −3 to +5 and a highest valence of IV; the triple bond in N₂ (1σ + 2π, 6 electrons) makes the molecule very stable.
  • NH₃ is made in the laboratory from 2NH₄Cl + Ca(OH)₂ and in industry by N₂ + 3H₂ ⇌ 2NH₃ + Q (Fe, 450–500 °C, high pressure, recycling).
  • NH₃ is a base (it attaches H⁺ to give NH₄⁺) and only a reducing agent: it burns to N₂ without a catalyst, gives NO over Pt and reduces CuO to copper.
  • Ammonium salts heated with an alkali release NH₃ — this is the test for NH₄⁺; NH₄Cl decomposes and recombines, NH₄NO₃ → N₂O, NH₄NO₂ → N₂.
  • N₂O and NO are non-salt-forming, N₂O₃ and N₂O₅ are acidic oxides; NO₂ disproportionates with water and alkalis and gives HNO₃ together with oxygen.
  • For N₂ + 3H₂ → 2NH₃: the decrease of the mixture equals the NH₃ formed, and since the mass is constant n₂ / n₁ = p₂ / p₁ = M̄₁ / M̄₂.
Spotted a mistake or something inaccurate in this lesson?

Check yourself

12 questions. Every correct answer earns XP.

Question 1 / 12

Question 1 / 12. How many electrons take part in the bonding in the N₂ molecule?