Solutions and solubility

Solvent and solute, types of solutions, the hydrate theory and heat effects of dissolving, solubility and solubility curves, crystallisation on cooling, saturated, unsaturated and supersaturated solutions, crystal hydrates and the solubility of gases — with DİM-style tasks.

  • Grades 8 and 9
  • 25 min
  • 12 questions
  • Lesson 10 of 45

In this lesson you will learn

  • Explain the terms solution, solvent and solute and tell true solutions from suspensions and emulsions.
  • Explain dissolving with the hydrate theory and predict the heat effect of dissolving.
  • Work with solubility and solubility curves: decide whether a solution is saturated and find the mass fraction of a saturated solution and the mass of salt that crystallises on cooling.
  • Calculate the mass fraction of water in a crystal hydrate, find a hydrate’s formula and explain how temperature and pressure affect the solubility of gases.

Why does far more sugar dissolve in hot tea than in cold water, while an opened fizzy drink goes flat quickly in a warm room? Why does blue vitriol turn white when heated, and why does a glass get hot when NaOH dissolves but cold when ammonium nitrate does? Here you will learn how a solution forms, how much substance water can dissolve and why. Concentration calculations are in «Solution concentration: mass fraction and molarity».

Solution, solvent and solute

SolutionDefinition

A homogeneous system made of a solvent, one or more solutes and the products of their interaction. In sugar water, water is the solvent and sugar is the solute.

The solvent is usually the component in the same state as the solution or present in the larger amount. Water is the most common solvent, but air is a gaseous solution and brass (an alloy of copper and zinc) a solid one. By particle size, true solutions differ from other mixtures:

SystemParticlesPropertiesExamples
True solutionmolecules and ions, < 1 nmclear, does not settlesugar or NaCl in water
Suspensionsolid particles in a liquid, > 100 nmcloudy, settleswater with chalk or clay
Emulsiondroplets of one liquid in another, > 100 nmcloudy, separates into layersmilk, oil shaken with water
Systems with particles of 1–100 nm are colloidal solutions (gelatine, egg-white solution).

Sign up free to keep reading

The rest of the lesson, the quiz and your notes open with an Educora account. Signing up takes a minute, and your progress is saved on all your devices.

Dissolving is a physico-chemical process

Two processes take place when a crystal dissolves. The physical one: water molecules break down the crystal lattice and spread the particles through the whole volume — this takes energy. The chemical one: the particles bind water molecules and form hydrates (hydration) — this releases energy. At the end of the 19th century D. I. Mendeleev put forward the hydrate theory: a solution is not a simple mechanical mixture but a system holding compounds of the solute with water of variable composition. The evidence:

  • Heat effect. NaOH and concentrated H₂SO₄ make the solution very hot: hydration releases more energy than breaking the lattice uses. That is why concentrated acid is poured into water in a thin stream, never the other way round. NH₄NO₃ and KNO₃ cool the solution; with NaCl the temperature hardly changes.
  • Volume and colour change. 50 mL of ethanol and 50 mL of water give a little less than 100 mL. Anhydrous CuSO₄ is white, but its solution and crystal hydrate are blue: the colour comes from hydrated Cu²⁺ ions.

Exam style: heat effects of dissolving

Problem

Which statements about dissolving are true?
I. When NaOH dissolves in water, the solution heats up
II. When NH₄NO₃ dissolves, more energy is used to break the crystal lattice than is released by hydration
III. Dissolving is a purely physical process
A) I only B) III only C) I, II D) II, III E) I, II, III

Show solutionHide solution

Solution

I is true: the hydration of NaOH releases a lot of energy.
II is true: that is why NH₄NO₃ cools the solution (instant cold packs work this way).
III is false: hydration is a chemical interaction, so dissolving is a physico-chemical process.
Correct answer: C.

Solubility. Saturated and unsaturated solutions

Solubility (S)Definition

The greatest mass of a substance (g) that dissolves in 100 g of water at a given temperature, forming a saturated solution. For example, at 20 °C S(NaCl) ≈ 36 g and S(KNO₃) = 31.6 g.

By solubility, substances are soluble (more than 1 g per 100 g of water: NaCl, sugar), slightly soluble (0.01–1 g: CaSO₄, Ca(OH)₂) or practically insoluble (less than 0.01 g: CaCO₃, AgCl).

  • A saturated solution cannot dissolve any more of the substance at that temperature; it is in equilibrium with undissolved crystals.
  • An unsaturated solution holds less than S per 100 g of water and can still dissolve the substance.
  • A supersaturated solution holds more than S and is unstable. It is made by cooling a hot saturated solution without shaking (sodium acetate, sodium thiosulfate); a tiny seed crystal makes the excess crystallise at once.
ω(saturated) = S / (100 + S) · 100%ω(saturated) = S / (100 + S) · 100%

Where

S
solubility, g per 100 g of water
ω
mass fraction of the substance in the saturated solution, %

Every (100 + S) g of a saturated solution contain 100 g of water and S g of substance. Rearranged: S = 100 · ω / (100 − ω).

Calculation: solubility and mass fraction

Problem

1) At a certain temperature the solubility of a salt is 25 g. Find its mass fraction in the saturated solution.
2) The mass fraction of a substance in its saturated solution is 37.5%. Find the solubility.

Show solutionHide solution

Solution

1) ω = 25 / (100 + 25) · 100% = 20% — not 25%: S refers to 100 g of water and ω to 100 g of solution.
2) S = 100 · 37.5 / (100 − 37.5) = 3750 / 62.5 = 60 g.

Solubility curves and crystallisation on cooling

The solubility of most solids rises with temperature, but to very different degrees. A solubility curve shows how S depends on temperature: the KNO₃ curve rises steeply, while the NaCl curve is almost flat. For a few substances, such as Ca(OH)₂, solubility falls on heating.

Interactive

Loading simulation…
Solubility, g per 100 g of water. Source: solubility tables (CRC Handbook of Chemistry and Physics and school reference books); values differ by 1–2% between sources.

A point on the curve is a saturated solution, a point below it an unsaturated one. The difference between the two curves is used for purification: when a hot saturated solution is cooled, KNO₃ crystallises while an NaCl impurity stays in solution (recrystallisation).

  1. Water and salt

    m(water) = m(solution) · 100 / (100 + S₁); the rest is salt.

  2. Still dissolved

    m₂ = m(water) · S₂ / 100 (the water does not change).

  3. Crystals

    m(salt) − m₂.

m(crystals) = m(water) · (S₁ − S₂) / 100m(crystals) = m(water) · (S₁ − S₂) / 100

Where

m(water)
mass of water in the hot saturated solution, g
S₁, S₂
solubilities at the higher and the lower temperature, g

Valid when the anhydrous salt crystallises (KNO₃, NaCl). A crystal hydrate also takes water out of the solution.

Exam style: crystallisation on cooling

Problem

538 g of a KNO₃ solution saturated at 80 °C was cooled to 40 °C. Calculate the mass (g) of salt that crystallises. The solubility of KNO₃ is 169 g at 80 °C and 64 g at 40 °C.
A) 105 B) 210 C) 338 D) 128 E) 169

Show solutionHide solution

Solution

1) At 80 °C, 100 + 169 = 269 g of saturated solution contain 100 g of water; 538 g is twice as much: m(water) = 200 g, m(KNO₃) = 338 g.
2) At 40 °C, 200 g of water keep 2 · 64 = 128 g of KNO₃ dissolved.
3) m(crystals) = 338 − 128 = 210 g; by the formula: 200 · (169 − 64) / 100 = 210 g.
Correct answer: B. 105 g is the answer for only 100 g of water, and 128 g is the salt that stays in solution.

Exam style: saturated or not (table)

Problem

Use the solubility curves above. Which mixtures are unsaturated solutions?
Mixture | t, °C | Water, g | KNO₃, g
1 | 20 | 200 | 50
2 | 40 | 50 | 35
3 | 60 | 300 | 330
A) 1 only B) 2 only C) 1, 3 D) 2, 3 E) 1, 2

Show solutionHide solution

Solution

Scale each mixture to 100 g of water and compare with S:
1: 50 g / 200 g water = 25 g / 100 g water < 31.6 g — unsaturated.
2: 35 g / 50 g water = 70 g / 100 g water > 63.9 g — saturated, with about 3 g of salt left undissolved.
3: 330 g / 300 g water = 110 g / 100 g water = S(60 °C) — saturated.
Correct answer: A.

Crystal hydrates

Crystal hydrateDefinition

A crystalline substance that contains a fixed number of water molecules (water of crystallisation): CuSO₄·5H₂O. On heating the water is driven off: CuSO₄·5H₂O → CuSO₄ + 5H₂O, and the blue crystals become a white powder. Anhydrous CuSO₄ turns blue again when it absorbs water — a test for water.

NameFormulaM, g/molω(H₂O), %
blue vitriolCuSO₄·5H₂O25036.0
green vitriolFeSO₄·7H₂O27845.3
washing sodaNa₂CO₃·10H₂O28662.9
gypsumCaSO₄·2H₂O17220.9
Heated gypsum loses part of its water and becomes plaster of Paris (2CaSO₄·H₂O), which sets hard again with water.
ω(H₂O) = 18 · n / M(hydrate) · 100%ω(H₂O) = 18 · n / M(hydrate) · 100%

Where

n
number of water molecules per formula unit
M(hydrate)
molar mass of the hydrate: M(anhydrous salt) + 18 · n, g/mol

The mass lost on heating is the water of crystallisation; n(anhydrous salt) = n(hydrate).

Calculation: water of crystallisation

Problem

1) Calculate the mass fraction of water in blue vitriol.
2) 57.2 g of washing soda was heated until all the water of crystallisation was driven off. What mass of anhydrous Na₂CO₃ remained?
Mr(CuSO₄) = 160, Mr(Na₂CO₃) = 106, Mr(H₂O) = 18

Show solutionHide solution

Solution

1) M(CuSO₄·5H₂O) = 160 + 90 = 250; ω(H₂O) = 90 / 250 · 100% = 36%.
2) M(Na₂CO₃·10H₂O) = 106 + 180 = 286; n = 57.2 / 286 = 0.2 mol → m(Na₂CO₃) = 0.2 · 106 = 21.2 g (36 g of water was lost).

Exam style: formula of a crystal hydrate (coded task)

Problem

When 24.6 g of the crystal hydrate MgSO₄·xH₂O was heated, it lost all its water of crystallisation and 12 g of residue remained. Calculate x. Mr(MgSO₄) = 120, Mr(H₂O) = 18

Show solutionHide solution

Solution

n(MgSO₄) = 12 / 120 = 0.1 mol; m(H₂O) = 24.6 − 12 = 12.6 g → n(H₂O) = 12.6 / 18 = 0.7 mol.
n(MgSO₄) : n(H₂O) = 0.1 : 0.7 = 1 : 7 → x = 7, the formula is MgSO₄·7H₂O.
Check: M = 120 + 7 · 18 = 246 g/mol, and 24.6 g = 0.1 mol.

What solubility depends on. Solubility of gases

  • Nature of the substances. «Like dissolves like»: ionic and polar substances (NaCl, sugar, HCl) dissolve well in polar water, non-polar ones (oil, iodine) in non-polar solvents (petrol, benzene).
  • Temperature. Heating increases the solubility of most solids but decreases that of gases.
  • Pressure hardly affects solids and liquids. At constant temperature the solubility of a gas is directly proportional to its pressure (Henry’s law).
  • Grinding and stirring only speed up dissolving; they do not change the solubility.

Fizzy drinks are bottled under high CO₂ pressure: when the bottle is opened, the pressure drops, the solubility of CO₂ falls and the extra gas escapes as bubbles. Little oxygen dissolves in warm water, so fish in shallow ponds may lack oxygen in summer. Gases that react with water dissolve extremely well: at 20 °C one volume of water dissolves about 700 volumes of ammonia.

Exam style: factors affecting solubility

Problem

Which statements about solubility are NOT true?
1. As temperature rises, the solubility of gases in water decreases
2. As pressure rises, the solubility of gases increases
3. Grinding a salt increases its solubility
4. The solubility of Ca(OH)₂ decreases on heating
5. Cooling an unsaturated solution always produces crystals

Show solutionHide solution

Solution

1, 2 and 4 are true.
3 is false: grinding only speeds up dissolving and does not change S.
5 is false: the solution may still be unsaturated after cooling; crystals appear only once it is cooled past saturation (and sometimes not even then — a supersaturated solution forms).
Answer: 3, 5.

Remember

  • A solution is a homogeneous system of solvent, solute and their hydrates; in a true solution the particles are smaller than 1 nm, while suspensions and emulsions are cloudy and separate.
  • Dissolving is a physico-chemical process (Mendeleev’s hydrate theory): breaking the lattice absorbs energy and hydration releases it; NaOH and H₂SO₄ heat the solution, NH₄NO₃ cools it.
  • Solubility S is the greatest mass that dissolves in 100 g of water at a given temperature; in a saturated solution ω = S / (100 + S) · 100%.
  • S is read from a solubility curve; the salt that crystallises on cooling is m(water) · (S₁ − S₂) / 100.
  • In a crystal hydrate ω(H₂O) = 18 · n / M · 100%; the mass lost on heating is the water of crystallisation, and the formula comes from the mole ratio.
  • Gases dissolve less on heating and more at higher pressure (Henry’s law); grinding and stirring only speed up dissolving.
Spotted a mistake or something inaccurate in this lesson?

Check yourself

12 questions. Every correct answer earns XP.

Question 1 / 12

Question 1 / 12. In sweet tea, what is the solvent?