Introduction to organic chemistry: alkanes and cycloalkanes

Butlerov’s structure theory, classification of organic compounds and homologous series; structure, preparation and reactions of alkanes and cycloalkanes, and finding a formula from combustion data — with DİM-style tasks.

  • Grade 10
  • 25 min
  • 12 questions
  • Lesson 22 of 45

In this lesson you will learn

  • Explain the ideas of Butlerov’s theory and classify organic compounds by skeleton and saturation.
  • Describe the structure of alkanes and cycloalkanes (sp³, 109.5°) and count σ bonds, hybrid orbitals and polar bonds.
  • Write equations for making alkanes (Wurtz, decarboxylation, Al₄C₃) and for their reactions (combustion, halogenation, cracking, dehydrogenation, isomerisation); recognise ring-opening additions of small rings.
  • Find the formula of an alkane or cycloalkane from combustion products, mass or volume, and solve mixture problems.

On the slope of Yanardag on the Absheron peninsula natural gas seeping from the ground has been burning for many years, and at the Neft Dashlari (Oil Rocks) field in the Caspian Sea the first oil was produced in 1949. Natural gas and oil are both mixtures of hydrocarbons — compounds of carbon and hydrogen only. We begin organic chemistry with the simplest class, the saturated hydrocarbons; the 2026 DİM exams asked for an alkane’s formula from combustion data and for the number of quaternary carbons.

Organic chemistry and Butlerov’s structure theory

Organic chemistry is the chemistry of carbon compounds; CO, CO₂, carbonic acid, carbonates and carbides are counted as inorganic. For a long time such substances were thought to arise only in living things, but in 1828 Friedrich Wöhler made urea from inorganic ammonium cyanate. Carbon is tetravalent and links to other carbon atoms in straight and branched chains and in rings — that is why there are millions of organic compounds.

  1. Atoms in a molecule are joined in a definite order according to their valences (carbon is always tetravalent); this order is the chemical structure.
  2. The properties of a substance depend not only on its composition but also on its structure — the reason why isomers exist.
  3. Atoms and groups of atoms in a molecule influence one another.
  4. Structure can be worked out from properties, and properties can be predicted from structure.

Alexander Butlerov put forward these ideas in 1861. Organic compounds are divided by their carbon skeleton into acyclic (open-chain) and cyclic, by saturation into saturated (only single C–C bonds) and unsaturated, and by functional group into classes. Members of one class form a homologous series: neighbours differ by one CH₂ group (the homologous difference). Naming and counting isomers have their own lesson — see “Nomenclature and isomerism of organic compounds”.

Sign up free to keep reading

The rest of the lesson, the quiz and your notes open with an Educora account. Signing up takes a minute, and your progress is saved on all your devices.

Structure and physical properties of alkanes

In alkanes (paraffins) the carbon atoms are joined only by single σ bonds; the general formula is CₙH₂ₙ₊₂. Every carbon is sp³ hybridised: four hybrid orbitals point to the corners of a tetrahedron, the bond angle is 109.5° (109°28′) and the C–C bond is 0.154 nm long. So the chain is a zigzag, not a straight line, and groups rotate freely about the single bonds.

AlkaneFormulaMrBoiling point, °CAt room temperature
methaneCH₄16−162gas
ethaneC₂H₆30−89gas
propaneC₃H₈44−42gas
butaneC₄H₁₀58−0.5gas
pentaneC₅H₁₂7236liquid
hexaneC₆H₁₄8669liquid
The longer the chain, the higher the boiling point; long-chain alkanes are solids (paraffin wax). Branching lowers it: pentane boils at 36 °C, 2-methylbutane at 28 °C, 2,2-dimethylpropane at 9.5 °C. Alkanes do not dissolve in water and are lighter than water.
Mr(CₙH₂ₙ₊₂) = 14n + 2

Where

n
number of carbon atoms
14
mass of one CH₂ group (the homologous difference)

Hence n = (Mr − 2) / 14. In one molecule: C–H (polar) bonds 2n + 2, C–C (non-polar) n − 1, σ bonds 3n + 1, hybrid orbitals 4n.

Exam style: formula and bonds (coded task)

Problem

1) Find the formula of the alkane with Mr = 100.
2) Use the table to calculate x + y.
Substance — Number of hybrid orbitals — Number of σ bonds
Alkane — 28 — x
Cycloalkane — 28 — y

Show solutionHide solution

Solution

1) 14n + 2 = 100 → n = 7: C₇H₁₆ (heptane).
2) Each sp³ carbon gives 4 hybrid orbitals: 4n = 28 → n = 7 (in both substances).
Alkane C₇H₁₆: σ = 3n + 1 = 22 (6 C–C + 16 C–H) → x = 22.
Cycloalkane C₇H₁₄: the ring has n C–C bonds, σ = n + 2n = 3n = 21 → y = 21.
x + y = 43.

Making alkanes and their reactions

Industry takes alkanes from natural gas and oil. Laboratory methods: the Wurtz reaction — a haloalkane heated with sodium, the chain doubles: 2CH₃Cl + 2Na → C₂H₆ + 2NaCl; decarboxylation — a salt of a carboxylic acid fused with an alkali, the chain loses one C: CH₃COONa + NaOH → CH₄↑ + Na₂CO₃; hydrolysis of aluminium carbide: Al₄C₃ + 12H₂O → 3CH₄↑ + 4Al(OH)₃; hydrogenation of alkenes: C₂H₄ + H₂ → C₂H₆ (Ni, t°).

Alkanes are not very reactive: under normal conditions they do not decolourise bromine water or KMnO₄ solution. Their typical reactions are substitutions. In light (hν) chlorination runs by a radical chain mechanism, step by step: CH₄ + Cl₂ → CH₃Cl + HCl, then CH₂Cl₂, CHCl₃ (chloroform) and CCl₄ form. An H on a tertiary carbon is replaced most easily and one on a primary carbon least easily, so bromination of propane gives mainly 2-bromopropane. Konovalov nitration (dilute HNO₃, t°, p): CH₄ + HNO₃ → CH₃NO₂ + H₂O.

  • Cracking (450–700 °C): a long chain breaks into an alkane and an alkene — C₁₀H₂₂ → C₅H₁₂ + C₅H₁₀.
  • Dehydrogenation (Ni or Pt, t°): C₂H₆ → C₂H₄ + H₂. Methane breaks down into C and H₂ at 1000 °C and into acetylene at 1500 °C: 2CH₄ → C₂H₂ + 3H₂.
  • Isomerisation (AlCl₃, t°): butane → 2-methylpropane; branched alkanes improve the quality of petrol.
  • Combustion: complete burning gives CO₂ and H₂O; with too little oxygen poisonous carbon monoxide CO and soot (C) form.

Calculation: preparation and chlorination

Problem

1) Which alkanes form when a mixture of CH₃Br and C₂H₅Br reacts with sodium?
2) Fusing sodium acetate with NaOH gave 4.48 L of methane (STP). What mass of CH₃COONa was used? Mr(CH₃COONa) = 82
3) 5.6 L of methane (STP) was fully chlorinated to CCl₄. What volume of chlorine (STP) was used and what mass of CCl₄ formed? Mr(CCl₄) = 154

Show solutionHide solution

Solution

1) The groups combine in every pair: CH₃–CH₃ (ethane), CH₃–C₂H₅ (propane), C₂H₅–C₂H₅ (butane) — three alkanes.
2) n(CH₄) = 4.48 / 22.4 = 0.2 mol; the ratio is 1 : 1 → n(CH₃COONa) = 0.2 mol, m = 0.2 · 82 = 16.4 g.
3) CH₄ + 4Cl₂ → CCl₄ + 4HCl. n(CH₄) = 5.6 / 22.4 = 0.25 mol → n(Cl₂) = 4 · 0.25 = 1 mol, V = 22.4 L; m(CCl₄) = 0.25 · 154 = 38.5 g.

Cycloalkanes

In cycloalkanes the carbon atoms form a closed ring; the general formula is CₙH₂ₙ (n ≥ 3), so they are functional-group isomers of alkenes: cyclopropane C₃H₆, cyclobutane C₄H₈, cyclopentane C₅H₁₀, cyclohexane C₆H₁₂. The carbons are sp³, but in small rings the angle is far below 109.5° (60° in cyclopropane, about 90° in cyclobutane), so the ring is strained and opens easily.

ReactionCyclopropane, cyclobutaneCyclopentane, cyclohexane
H₂ (Ni, t°)the ring opens: C₃H₆ + H₂ → C₃H₈; C₄H₈ + H₂ → C₄H₁₀no reaction under ordinary conditions
Br₂, HBrcyclopropane adds them: C₃H₆ + Br₂ → CH₂Br–CH₂–CH₂Br; C₃H₆ + HBr → CH₃–CH₂–CH₂Brsubstitution in light: C₆H₁₂ + Cl₂ → C₆H₁₁Cl + HCl
KMnO₄ solutionnot decolourisednot decolourised
Preparation: a dihaloalkane + Zn (CH₂Br–CH₂–CH₂Br + Zn → C₃H₆ + ZnBr₂), hydrogenation of benzene (C₆H₆ + 3H₂ → C₆H₁₂). Heated over Pt, cyclohexane turns into benzene: C₆H₁₂ → C₆H₆ + 3H₂.

Exam style: statements about cyclopropane

Problem

Choose the true statements about cyclopropane.
1. It fits the general formula CₙH₂ₙ
2. It is an isomer of propene
3. It undergoes addition with bromine
4. Its molecule has 9 σ bonds
5. It decolourises aqueous KMnO₄

Show solutionHide solution

Solution

1, 2 — true: C₃H₆ is the formula of both cyclopropane and propene.
3 — true: the strained ring opens and 1,3-dibromopropane forms.
4 — true: 3 C–C + 6 C–H = 9 (3n with n = 3).
5 — false: cycloalkanes do not decolourise KMnO₄ solution — this is how propene is told apart from cyclopropane.
Answer: 1, 2, 3, 4.

Interactive

Loading simulation…
Alkanes and large-ring cycloalkanes prefer substitution; small rings undergo addition.

Finding the formula from combustion data

CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → nCO₂ + (n + 1)H₂OCₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → nCO₂ + (n + 1)H₂O

Where

n
number of carbon atoms in the alkane
(3n + 1)/2(3n + 1)/2
moles of O₂ needed to burn 1 mol of alkane

Masses: (14n + 2) g of alkane → 44n g of CO₂ and 18(n + 1) g of H₂O. For cycloalkanes: CₙH₂ₙ + 3n/2 O₂ → nCO₂ + nH₂O.

Exam style: formula from combustion

Problem

Complete combustion of 7.2 g of an alkane gives 11.2 L of carbon dioxide (STP). Find the formula of the alkane. Ar(C) = 12, Ar(H) = 1
A) C₃H₈ B) C₄H₁₀ C) C₅H₁₂ D) C₆H₁₄ E) C₂H₆

Show solutionHide solution

Solution

n(CO₂) = 11.2 / 22.4 = 0.5 mol.
1 mol of alkane gives n mol of CO₂: (7.2 / (14n + 2)) · n = 0.5.
7.2n = 7n + 1 → 0.2n = 1 → n = 5: C₅H₁₂ (Mr = 72; 7.2 g = 0.1 mol → 0.5 mol CO₂ ✓).
Answer: C.

Exam style: burning a mixture (written task)

Problem

0.5 mol of a mixture of methane and cyclopropane burned completely and gave 1.1 mol of CO₂. Calculate 1) the amount of cyclopropane in the mixture; 2) the mass of water formed (g).

Show solutionHide solution

Solution

CH₄ → x mol, C₃H₆ → y mol: x + y = 0.5; for CO₂ x + 3y = 1.1.
Subtract: 2y = 0.6 → 1) y = 0.3 mol, x = 0.2 mol.
Water: each mol of CH₄ gives 2 mol and each mol of C₃H₆ 3 mol of H₂O: 2 · 0.2 + 3 · 0.3 = 1.3 mol.
2) m(H₂O) = 1.3 · 18 = 23.4 g.

Remember

  • Butlerov: atoms join in an order set by valence, and properties depend on composition and structure; homologues differ by CH₂.
  • Alkanes CₙH₂ₙ₊₂ (Mr = 14n + 2): sp³, 109.5°, only σ bonds; σ = 3n + 1, hybrid orbitals 4n.
  • Preparation: Wurtz (chain doubles), decarboxylation (one C fewer), Al₄C₃ + H₂O → CH₄; reactions: substitution in light, cracking, dehydrogenation, isomerisation, combustion.
  • Cycloalkanes CₙH₂ₙ are isomers of alkenes; C₃ and C₄ rings add H₂, Br₂, HBr, while C₅ and C₆ undergo substitution; they do not decolourise KMnO₄.
  • Combustion: CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → nCO₂ + (n + 1)H₂O; for alkanes n(H₂O) − n(CO₂) = n(alkane), for cycloalkanes n(H₂O) = n(CO₂).
Spotted a mistake or something inaccurate in this lesson?

Check yourself

12 questions. Every correct answer earns XP.

Question 1 / 12

Question 1 / 12. According to Butlerov’s theory, what do the properties of a substance depend on?