Formulas & shortcuts
Chemistry112 formulas43 shortcuts
Every formula in this course and the easiest ways to remember them, on one page.
Substances and atoms
BeginnerThe structure of the atom
Open lessonWhere
- A
- mass number — the total number of protons and neutrons
- Z
- atomic number — the number of protons
- N
- the number of neutrons
The mass number is written at the top left of the symbol: ²³Na, ³⁵Cl.
The periodic table and chemical bonds
IntermediateThe periodic law and the periodic table
Open lessonSodium reacts with water, forming an alkali (sodium hydroxide) and hydrogen gas.
Chemical bonds
Open lessonSodium hands its electron to chlorine; both ions end up with 8 outer electrons.
Valence and chemical formulas
Open lessonWhere
- Mr
- relative molecular mass (no unit)
- Ar
- relative atomic mass of the element (from the periodic table)
- n
- the number of atoms of that element in the formula
Reactions and chemical calculations
IntermediateThe mole and molar mass
Open lessonWhere
- N
- number of particles
- n
- amount of substance, in mol
- Nₐ
- Avogadro constant, 6.02·10²³ mol⁻¹
Where
- n
- amount of substance, in mol
- m
- mass of the substance, in g
- M
- molar mass, in g/mol
Where
- V
- volume of the gas, in L
- Vₘ
- molar volume, 22.4 L/mol at normal conditions
Stoichiometry: excess and limiting reagent, yield
Open lessonWhere
- n(A), n(B)
- amounts of substances A and B that react (or form), mol
- a, b
- the coefficients of A and B in the equation
The amounts of substances that react or form are proportional to their coefficients
Where
- n(A), n(B)
- amounts of the reactants taken, mol
- a, b
- coefficients in the equation
- n(B, left)
- amount of B left over after the reaction, mol
The reactant with the smaller moles / coefficient ratio is limiting; left over = taken − used
Where
- m
- mass of each reactant taken, g
- Δm
- mass of the reactant left over, g
- a · M(A)
- coefficient × molar mass of the limiting reagent (the larger product)
- b · M(B)
- the same product for the reactant in excess (the smaller one)
Mass of each reactant when they are taken in equal masses; A is the limiting reagent, B the one left over
Where
- η
- percentage yield, %
- m(actual)
- mass (volume, amount) of product actually obtained
- m(theoretical)
- mass (volume, amount) calculated from the equation
Yield is the ratio of the product actually obtained to the theoretically possible amount
Where
- m(pure)
- mass of the pure substance that reacts
- m(sample)
- mass of the impure (technical) sample
- ω(impurity)
- mass fraction of impurities, %
Mass of the pure substance in an impure sample
Where
- η(overall)
- overall yield of the process (as a fraction)
- η₁, η₂, …
- yields of the separate steps (as fractions)
The overall yield is the product of the step yields
Where
- x, y
- amounts of the two components, mol
- M₁, M₂
- molar masses of the components, g/mol
- k₁, k₂
- moles of gas from 1 mol of each component (1 for Mg + 2HCl, 1.5 for Al)
System of equations when both components react
Solutions and solubility
Open lessonWhere
- S
- solubility, g per 100 g of water
- ω
- mass fraction of the substance in the saturated solution, %
Every (100 + S) g of a saturated solution contain 100 g of water and S g of substance. Rearranged: S = 100 · ω / (100 − ω).
Where
- m(water)
- mass of water in the hot saturated solution, g
- S₁, S₂
- solubilities at the higher and the lower temperature, g
Valid when the anhydrous salt crystallises (KNO₃, NaCl). A crystal hydrate also takes water out of the solution.
Where
- n
- number of water molecules per formula unit
- M(hydrate)
- molar mass of the hydrate: M(anhydrous salt) + 18 · n, g/mol
The mass lost on heating is the water of crystallisation; n(anhydrous salt) = n(hydrate).
Solution concentration: mass fraction and molarity
Open lessonWhere
- ω
- mass fraction of the solute, %
- m(solute)
- mass of the solute, g
- m(solution)
- mass of the solution, g: m(solute) + m(water)
Rearranged: m(solute) = m(solution) · ω (ω as a fraction). If a volume is given, first find the mass: m = ρ · V.
Where
- C
- molar concentration, mol/L
- n
- amount of solute, mol: n = m / M
- V
- volume of the solution, L (1 L = 1000 mL)
Rearranged: n = C · V and m = C · V · M. If the volume is in mL, divide by 1000 to get litres.
Where
- ρ
- density of the solution, g/mL
- ω
- mass fraction in percent (20 for a 20% solution)
- M
- molar mass of the solute, g/mol
Rearranged: ω = C · M / (10 · ρ). The formula works only with ρ in g/mL and ω in percent.
Where
- m₁, m₂
- masses of the solutions mixed (or of the water or salt added), g
- ω₁, ω₂
- their mass fractions
- ω₃
- mass fraction of the new solution
Adding water: ω₂ = 0. Adding salt: ω₂ = 100%. Evaporation: m(solute) stays the same, m(solution) = m₁ − m(water).
Where
- m₁
- mass of the stronger solution (ω₁)
- m₂
- mass of the weaker solution (ω₂) or of water
- ω₃
- required mass fraction: ω₁ > ω₃ > ω₂
It follows from the balance equation: m₁ · (ω₁ − ω₃) = m₂ · (ω₃ − ω₂). For water ω₂ = 0.
Where
- M(salt)
- molar mass of the anhydrous salt (CuSO₄: 160 g/mol)
- M(hydrate)
- molar mass of the hydrate (CuSO₄·5H₂O: 160 + 5 · 18 = 250 g/mol)
n(CuSO₄) = n(CuSO₄·5H₂O); mass of the solution = m(hydrate) + m(water).
Where
- m₁, m₂
- masses of the solutions mixed or of the substance added, g
- m(gas)
- mass of the gas released, g
- m(precipitate)
- mass of the precipitate, g
Then ω(product) = m(product) / m(final solution) · 100%.
Inorganic chemistry: classes of substances and the elements
AdvancedAcids, bases, salts and pH
Open lessonAcid + base → salt + water
Electrolytic dissociation, ion-exchange reactions and hydrolysis of salts
Open lessonWhere
- n(electrolyte)
- amount of dissolved electrolyte, mol
- α
- degree of dissociation (as a fraction); α = 1 for complete dissociation
- x + y
- number of ions from one formula unit: AₓBᵧ → xAᵐ⁺ + yBⁿ⁻
Total amount of ions formed on dissociation
Where
- α
- degree of dissociation, %
- n(dissociated)
- amount of molecules (formula units) that broke up into ions, mol
- n(dissolved)
- total amount of substance dissolved, mol
The degree of dissociation shows what percentage of the dissolved particles broke up into ions
Metals and non-metals
Open lessonReactivity decreases from left to right.
Halogens. Chlorine and its compounds
Open lessonWhere
- n(oxidant)
- amount of the oxidising agent, mol
- z
- electrons gained by one formula unit: MnO₂ → 2, KMnO₄ → 5, K₂Cr₂O₇ → 6
Chlorine from oxidising concentrated HCl (when the oxidant contains no chlorine). KClO₃ is the exception: its own chlorine also ends up in Cl₂, 1 mol of KClO₃ → 3 mol of Cl₂.
Where
- n(Me)
- amount of metal, mol
- v
- valency of the metal in its chloride (Na → 1, Mg, Zn, Fe → 2, Al → 3)
Metal + HCl: one mole of metal uses as many moles of HCl as its valency and releases half as many moles of H₂
Sulfur and its compounds. Sulfuric acid
Open lessonWhere
- n(Me)
- amount of metal, mol
- v
- oxidation state of the metal in the salt (Cu, Zn, Mg → 2; Fe, Al → 3)
- k
- electrons gained by one S⁺⁶ atom: SO₂ → 2, S → 6, H₂S → 8
The first term is the acid that ends up in the salt, the second the acid that oxidises: 1 mol of Cu (SO₂) uses 2 mol of H₂SO₄, 1 mol of Mg (H₂S) 1.25 mol.
Nitrogen, ammonia and ammonium salts
Open lessonWhere
- n₁, n₂
- total amount of the gas mixture before and after the reaction, mol (or its volume, L)
- n(N₂)ᵣ, n(H₂)ᵣ
- amounts of nitrogen and hydrogen that have reacted, mol
N₂ + 3H₂ → 2NH₃: every 4 mol of gas are replaced by 2 mol, so the decrease of the mixture equals the amount of ammonia formed.
Where
- n₁, n₂
- total amount of gas before and after the reaction, mol
- p₁, p₂
- pressure in a closed vessel (at constant V and T)
- M̄₁, M̄₂
- mean molar mass of the mixture, g/mol: M̄ = 2 · D(H₂)
The mass of the gases does not change in the reaction (m = n · M̄ = const), so as the amount falls the mean molar mass rises.
Nitric acid and nitrates
Open lessonWhere
- n(NH₃)
- amount of ammonia taken, mol (or kmol)
- η
- overall yield of all stages (as a fraction)
Nitrogen balance: the nitrogen atom of each NH₃ molecule ends up in one HNO₃ molecule, so the intermediate equations are not needed.
Where
- n(Me) · z
- electrons given by the metal: amount of metal × its oxidation state in the salt (Cu, Mg, Zn → 2; Fe, Al → 3; Ag → 1)
- e
- electrons accepted per molecule (formula unit) of product: NO₂ → 1, NO → 3, N₂O → 8, N₂ → 10, NH₄NO₃ → 8
Electron balance: the electrons given by the metal equal the electrons accepted by nitrogen.
Where
- n(Me) · z
- NO₃⁻ ions that end up in the salt, mol
- a
- nitrogen atoms in one molecule of the product: NO₂, NO → 1; N₂O, N₂ → 2; NH₄NO₃ → 2 (one reduced, one the NO₃⁻ of the salt)
The acid used has two parts: the part that forms the salt and the part that ends up in the nitrogen product.
Where
- Δm
- decrease in the mass of the solid on heating, g
- m(gases)
- mass of the NO₂ and O₂ (or of the O₂ alone) given off, g
Conservation of mass: the mass “lost” by the solid goes into the gases. For Mg … Cu nitrates n(NO₂) : n(O₂) = 4 : 1 always.
Alkali metals and calcium
Open lessonWhere
- m(MeOH)
- mass of the alkali formed, g
- m(Me), m(H₂O)
- masses of the metal and the water, g
- m(H₂)
- mass of the hydrogen given off, g (for a peroxide — the mass of O₂ given off)
When a metal is dropped into water, the solution is lighter by the mass of gas released.
Where
- n(Ca²⁺), n(Mg²⁺)
- amounts of the hardness ions in the water (whatever salts they come from), mol
Full softening with soda: Ca²⁺ + CO₃²⁻ → CaCO₃↓ — one CO₃²⁻ ion per hardness ion.
Aluminium, iron and their compounds
Open lessonWhere
- n(Al)
- amount of aluminium reacting, mol
- n(H₂)
- amount of hydrogen released, mol
The same with an acid or an alkali: Al⁰ → Al⁺³ (3 electrons), 2H⁺¹ → H₂ (2 electrons). In a mixture only Al reacts with an alkali, whereas an acid attacks every metal before hydrogen.
Where
- a
- amount of AlCl₃ in the solution, mol
- x
- amount of NaOH added, mol
Adding alkali drop by drop: at x = 3a the precipitate is at its maximum (a mol), at x = 4a it has fully dissolved. The same mass of precipitate occurs at two different values of x.
Where
- Δm
- change in the mass of the plate, g (increase “+”, decrease “−”)
- n
- amount of metal reacted, mol (1 : 1 for ions of equal charge)
- M₁, M₂
- molar masses of the dissolving metal (the plate) and the deposited metal, g/mol
An active metal displaces a less active one from its salt: M₁ “leaves” the plate and M₂ “arrives”. If the ion charges differ, multiply by the equation coefficients: for Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag, Δm = n(Cu) · (2 · 108 − 64).
Genetic links between inorganic compounds
Open lessonWhere
- a, b
- number of atoms of the chain element in one formula unit of the starting and the final substance
- η₁, η₂
- yields of the steps (as fractions); 1 if not given
Atom balance: if the element is not lost along the chain, the final product can be calculated without the intermediate equations.
Organic chemistry
AdvancedIntroduction to organic chemistry: alkanes and cycloalkanes
Open lessonWhere
- n
- number of carbon atoms
- 14
- mass of one CH₂ group (the homologous difference)
Hence n = (Mr − 2) / 14. In one molecule: C–H (polar) bonds 2n + 2, C–C (non-polar) n − 1, σ bonds 3n + 1, hybrid orbitals 4n.
Where
- n
- number of carbon atoms in the alkane
- (3n + 1)/2(3n + 1)/2
- moles of O₂ needed to burn 1 mol of alkane
Masses: (14n + 2) g of alkane → 44n g of CO₂ and 18(n + 1) g of H₂O. For cycloalkanes: CₙH₂ₙ + 3n/2 O₂ → nCO₂ + nH₂O.
Nomenclature and isomerism of organic compounds
Open lessonWhere
- n(I)
- number of primary carbons
- n(III)
- number of tertiary carbons
- n(IV)
- number of quaternary carbons
True for every open-chain alkane from C₂ on: each tertiary carbon adds one extra chain end, each quaternary carbon two. Secondary carbons do not appear — use the identity to check a count.
Where
- D
- degree of unsaturation: rings plus π bonds
- C, H, N
- numbers of carbon, hydrogen and nitrogen atoms
- Hal
- number of halogen atoms; oxygen is ignored
Each ring and each π bond adds 1: C=C and C=O — 1, C≡C — 2, a benzene ring — 4.
Unsaturated hydrocarbons: alkenes, dienes and alkynes
Open lessonWhere
- N(hybrid)
- total number of hybrid orbitals of the carbon atoms
- N(sp³), N(sp²), N(sp)
- numbers of carbons in each hybrid state
This is how DİM counts. σ bonds: every single bond plus one per multiple bond; π: C=C — 1, C≡C — 2.
Where
- n(alkene)
- amount of alkene that adds bromine, mol
- 160
- molar mass of Br₂, g/mol
One C=C adds one Br₂ (a diene or an alkyne adds two). Since an alkene has M = 14n, the formula follows from m / n.
Aromatic hydrocarbons: benzene and its homologues
Open lessonWhere
- n
- number of carbon atoms (6 in benzene)
- 2n − 6
- number of hydrogen atoms
- 14n − 6
- relative molecular mass: 12n + (2n − 6)
General formula of the benzene series: 8 hydrogens fewer than the alkane CₙH₂ₙ₊₂, because the ring and each of the three double bonds take away 2 hydrogens.
Where
- n(CO₂) : n(H₂O)
- = n : (n − 3); 1 mol of arene gives 3 mol less water than CO₂
- (3n − 3)/2(3n − 3)/2
- moles of O₂ needed per mole of arene
Combustion of an arene: (14n − 6) g of arene → n mol of CO₂; n(CO₂) − n(H₂O) = 3 · n(arene).
Where
- η
- percentage yield, %
- m(actual)
- mass (or volume) actually obtained
- m(theoretical)
- mass (or volume) calculated from the equation
From starting material to product multiply by η; from product back to starting material divide by η.
Alcohols, ethers and phenol
Open lessonWhere
- n
- number of carbon atoms in the molecule
- Mr
- relative molecular mass: 12n + (2n + 1) + 16 + 1
Once Mr is known (from vapour density, a mass fraction or an equation), n follows.
Where
- n
- number of carbon atoms in CₙH₂ₙ₊₁OH
- σ
- all bonds (every one is single)
- polar
- C–H, C–O and O–H (DİM counts C–H as polar)
- non-polar
- C–C bonds
Atoms and bonds in a saturated monohydric alcohol. Quick check: polar bonds = H atoms + 1 (ethanol: 6 + 1 = 7).
Where
- k
- number of OH groups in the molecule: monohydric alcohols and phenol — 1, ethylene glycol — 2, glycerol — 3
- n(alcohol)
- amount of the alcohol (or phenol), mol
With excess sodium every two OH groups give one H₂ molecule; for a mixture, add up the hydrogen from each component.
Aldehydes, ketones and carboxylic acids
Open lessonWhere
- n
- in CₙH₂ₙO the number of all carbons, in CₙH₂ₙ₊₁CHO only the carbons of the radical
Position in the series: for an aldehyde = number of carbons, for a ketone = number of carbons − 2. CₙH₂ₙ₊₁CHO has n + 1 carbons and 2n + 2 hydrogens.
Where
- n(RCHO)
- amount of an aldehyde other than HCHO, mol
- n(Ag)
- amount of silver deposited, mol; m(Ag) = n(Ag) · 108
With an unknown aldehyde, test the HCHO case first.
Where
- k
- number of COOH groups in the acid molecule (monobasic 1, oxalic and adipic acids 2)
- n(CO₂)
- amount of CO₂ released with excess NaHCO₃, mol; V = n · 22.4 L (STP)
n(NaHCO₃) = n(CO₂): each COOH group releases one CO₂ molecule.
Esters, fats and soaps
Open lessonWhere
- n
- number of carbon atoms (n ≥ 2 for esters)
- Mr
- relative molecular mass: 12n + 2n + 32
Saturated monocarboxylic acids and their esters with saturated monohydric alcohols are interclass (functional-group) isomers: CH₃COOH and HCOOCH₃ (C₂H₄O₂); C₂H₅COOH, CH₃COOCH₃ and HCOOC₂H₅ (C₃H₆O₂).
Where
- m(H₂O)
- mass of water used in the hydrolysis; n(H₂O) = n(ester)
- Mr(ester)
- Mr(ester) = 18 · m(ester) / m(H₂O)
Conservation of mass: the products weigh more than the ester by the mass of water used. Then 14n + 32 = Mr → n = (Mr − 32) / 14.
Where
- Mr(acid)
- Mr of the fatty acid; for different residues use the sum of the three acids’ Mr instead of 3 · Mr
- 92 − 3 · 18
- plus glycerol, minus three water molecules
3RCOOH + C₃H₅(OH)₃ → (RCOO)₃C₃H₅ + 3H₂O. Tristearin: 3 · 284 + 38 = 890; two stearic and one oleic residue: 2 · 284 + 282 + 38 = 888.
Amines, amino acids and proteins
Open lessonWhere
- η₁
- yield of the nitration (as a fraction)
- η₂
- yield of the reduction (Zinin reaction)
In a multistep synthesis the overall yield is the product of the step yields: benzene → nitrobenzene → aniline
Where
- n
- number of carbon atoms in the amine molecule
Molar mass of a saturated amine. Combustion: 4CₙH₂ₙ₊₃N + (6n + 3)O₂ → 4nCO₂ + (4n + 6)H₂O + 2N₂, hence V(CO₂) : V(N₂) = 2n : 1
Where
- k
- number of amino-acid residues
- k − 1
- number of peptide bonds and of water molecules released
Hydrolysis: peptide + (k − 1)H₂O → k amino acids
Where
- n
- number of CH₂ groups
n = 1 glycine (75), n = 2 β-aminopropionic acid (89), n = 5 ε-aminocaproic acid (131)
Macromolecular compounds: plastics, fibres, rubbers
Open lessonWhere
- n
- degree of polymerisation — the number of units (not the amount n(X))
- M(polymer)
- average molar mass of the polymer, g/mol
- M(unit)
- molar mass of the repeat unit, g/mol
Degree of polymerisation; conversely, M(polymer) = n · M(unit)
Where
- ω(E)
- mass fraction of element E in the polymer
- k
- number of E atoms in one repeat unit
- M(unit)
- molar mass of the repeat unit, g/mol
The mass fraction is calculated from the unit and does not depend on n
Where
- η
- yield of the polymerisation (as a fraction: 80% = 0.8)
- m
- mass, kg or g
Polymerisation has no by-product: in theory 1 kg of monomer gives 1 kg of polymer
Where
- k
- water molecules released per repeat unit: kapron, enant, phenol-formaldehyde resin — 1; lavsan, nylon — 2
- 18
- M(H₂O), g/mol
n(H₂O) = k · n(unit); strictly kn − 1 molecules, negligible for large n
Genetic links between organic compounds
Open lessonWhere
- n(first), n(last)
- amounts of the first and last substances of the chain, mol
- k
- mole ratio from the carbon skeleton (moles of the last substance from 1 mol of the first)
- η₁ … ηₙ
- step yields (as fractions)
Amount of the final product of a multistep chain
Chemistry for upper grades
AdvancedRedox reactions
Open lessonThe key condition of the electron balance
Rate of chemical reactions
Open lessonWhere
- v
- average rate of a homogeneous reaction, mol/(L·s)
- ΔC
- change in molar concentration (absolute value), mol/L
- Δn
- change in the amount of substance, mol
- V
- volume of the vessel (solution), L
- Δt
- time interval, s
The rate is always positive: a reactant's concentration falls, a product's rises — the absolute value of the change is used.
Where
- v
- average rate of a heterogeneous reaction, mol/(cm²·s)
- S
- area of the contact surface between the phases, cm²
- Δn
- amount of substance that reacted (formed), mol
A solid reacts only at its surface (Zn + 2HCl, C + O₂, CaCO₃ + 2HCl).
Where
- v(A), v(B), v(C), v(D)
- average rates with respect to A, B, C, D, mol/(L·s)
- a, b, c, d
- coefficients in the equation
For aA + bB → cC + dD. In N₂ + 3H₂ → 2NH₃ the rate with respect to H₂ is 3 times, and with respect to NH₃ 2 times, the rate with respect to N₂ — that is why DİM always asks for «the rate with respect to substance …». The changes in amount over the same time are in the same ratio.
Where
- v
- reaction rate, mol/(L·s)
- k
- rate constant; depends on the nature of the reactants, the temperature and a catalyst, but not on concentration
- [A], [B]
- molar concentrations of the gaseous or dissolved reactants, mol/L
- a, b
- coefficients in the equation, used as powers
For aA + bB → products. Solids are left out: C(s) + O₂(g) → CO₂(g), v = k · [O₂]. At school and in DİM the powers equal the coefficients; strictly, this holds only for elementary (one-step) reactions — for multistep ones the orders come from experiment (see «Chemical kinetics»).
Where
- v₁, v₂
- rates at temperatures t₁ and t₂
- γ
- temperature coefficient — how many times the rate grows per 10 °C of heating (usually 2–4)
- t₁, t₂
- initial and final temperature, °C
The reaction time τ is inversely proportional to the rate: τ₂ = τ₁ / γ^((t₂ − t₁) / 10). On cooling (t₂ < t₁) the exponent is negative and the rate falls.
Chemical equilibrium and Le Chatelier's principle
Open lessonWhere
- [A], [B], [C], [D]
- equilibrium concentrations, mol/L
- a, b, c, d
- coefficients in the equation, used as powers
- K
- equilibrium constant; depends only on the reaction and the temperature
For aA + bB ⇌ cC + dD: products on top, reactants below. Solids are left out; in liquid-phase esterification water is a product, not the solvent, so it is included.
Galvanic cells and electrode potentials
Open lessonWhere
- Δm
- change in the mass of the plate, g (positive — heavier, negative — lighter)
- m(metal deposited)
- metal deposited on the plate, g
- m(metal dissolved)
- metal that went from the plate into solution, g
Find Δm per mole from the equation, then set up a proportion
Where
- E
- electromotive force (EMF) of the cell, V
- E°(cathode)
- standard potential of the metal with the higher potential (the cathode), V
- E°(anode)
- standard potential of the metal with the lower potential (the anode), V
In a working cell E is always positive; the further apart the metals are in the series, the larger the EMF. Daniell cell: 0.34 − (−0.76) = 1.10 V
Electrolysis and Faraday's laws
Open lessonWhere
- n(e⁻)
- amount of electrons passed, mol
- I
- current, A
- t
- time, s
- F
- Faraday constant, 96 500 C/mol
The «bridge» of every calculation: first the electrons, then the substances
Where
- m
- mass formed at the electrode, g
- M
- molar mass, g/mol
- z
- electrons per particle: Ag⁺ → 1, Cu²⁺ → 2, Al³⁺ → 3, O₂ → 4
- I · t
- quantity of electricity Q, C
Faraday's combined law = three steps: n(e⁻) → n(substance) = n(e⁻) / z → m = n · M
Where
- V(gas)
- volume of gas at the electrode, L (STP)
- Vₘ
- 22.4 L/mol
- z
- electrons per molecule: 2 for H₂ and Cl₂, 4 for O₂
For the same flow of electrons V(H₂) : V(O₂) = 2 : 1 and V(H₂) : V(Cl₂) = 1 : 1
Where
- m(metal)
- metal deposited at the cathode, g
- m(gases)
- gases formed at both electrodes, g (for water electrolysis = mass of water decomposed)
New mass fraction of the acid or alkali: ω = m(substance) / m(final solution)
Gas laws
Open lessonWhere
- n
- amount of gas, mol
- V
- volume of the gas, L
- Vₘ
- molar volume: 22.4 L/mol at STP
- m, M
- mass (g) and molar mass (g/mol)
- N, Nₐ
- number of molecules and the Avogadro constant, 6.02 · 10²³ mol⁻¹
The amount of a gas links its volume, mass and number of particles
Where
- ρ
- density of the gas at STP, g/L
- D
- relative density of gas A with respect to gas B (no unit)
- M(A), M(B)
- molar masses of the gases, g/mol
- 29
- mean molar mass of air, g/mol
Density and relative density of a gas; molar mass from relative density
Where
- V(A), V(B), V(C)
- volumes of the gases measured under the same conditions
- a, b, c
- the coefficients of these gases in the equation
In gas reactions the volumes are in the ratio of the coefficients
Where
- p
- pressure, kPa
- V
- volume, L (when p is in kPa)
- n
- amount of gas, mol
- R
- gas constant, 8.314 J/(mol·K)
- T
- absolute temperature, K: T = t + 273
Equation of state of an ideal gas
Where
- p₁, V₁, T₁
- initial pressure, volume and absolute temperature of the gas
- p₂, V₂, T₂
- the same quantities in the final state
The combined gas law: for a fixed amount of gas
Where
- φ(A)
- volume fraction of gas A (= mole fraction), as a fraction or %
- M(mean)
- mean molar mass of the mixture, g/mol
- M₁, M₂
- molar masses of the components
Volume fraction and mean molar mass of a gas mixture; ω(A) = φ(A) · M(A) / M(mean)
Chemistry in everyday life and industry
Open lessonAmmonia synthesis (Fe catalyst, 400–500 °C, 15–30 MPa) and making urea
Where
- ω(N)
- mass fraction of nitrogen in the fertiliser, %
- x
- number of nitrogen atoms in the formula
- Ar(N)
- relative atomic mass of nitrogen, 14
- M
- molar mass of the fertiliser, g/mol
University chemistry
UniversityAtomic orbitals and quantum numbers
Open lessonWhere
- λ
- de Broglie wavelength, m
- h
- Planck constant, 6.626·10⁻³⁴ J·s; ħ = h / 2π
- m, v
- mass (kg) and speed (m/s) of the particle
- Δx, Δp
- uncertainties in position and momentum
The de Broglie relation and Heisenberg's uncertainty principle
Where
- Eₙ
- energy of level n (hydrogen-like atom), eV
- Z
- nuclear charge (1 for H, 2 for He⁺)
- ΔE
- energy of the photon emitted in a transition
- c
- speed of light, 3.00·10⁸ m/s
Where
- Nₒ(l)
- orbitals in a subshell: s 1, p 3, d 5, f 7
- Nₒ(n), Nₑ(n)
- orbitals and maximum electrons in shell n
Proof: Σ(2l + 1) for l = 0 … n − 1 = 1 + 3 + … + (2n − 1) = n²
Where
- Zeff
- effective nuclear charge felt by the outer electron
- Z
- number of protons
- S
- shielding constant (contribution of the other electrons)
Zeff grows across a period — which is why atomic radius shrinks
Where
- μ
- spin-only magnetic moment
- n
- number of unpaired electrons
- μB
- Bohr magneton
Chemical bonding theories
Open lessonWhere
- V
- valence electrons of the central atom
- N
- number of attached atoms
- v
- electrons each neighbour needs: H or halogen 1; O or S 2
- q
- charge of the ion (negative for anions)
Where
- μ
- dipole moment, debye (D)
- q
- charge at each end, C
- d
- distance between the charges (bond length), m
Where
- BO
- bond order
- Nb
- electrons in bonding MOs
- Na
- electrons in antibonding MOs
Higher BO means a shorter, stronger bond; BO = 0 means no molecule (He₂)
Chemical thermodynamics
Open lessonWhere
- ΔfH°
- standard enthalpy of formation, kJ/mol; zero for elements in their standard states
- ν
- stoichiometric coefficient in the equation
A consequence of Hess's law: products minus reactants
Where
- k
- Boltzmann constant, 1.381·10⁻²³ J/K (k = R / Nₐ)
- W
- number of microstates consistent with the macrostate
- S°
- standard molar entropy, J/(mol·K)
For example, N₂ + 3H₂ → 2NH₃: ΔS° = 2 · 192.5 − (191.6 + 3 · 130.7) = −198.7 J/K (4 mol of gas → 2 mol)
Where
- ΔG
- change in Gibbs energy, kJ/mol; ΔG < 0 means spontaneous
- ΔS
- entropy change, J/(mol·K)
- T
- absolute temperature, K
- R
- 8.314 J/(mol·K)
- K
- equilibrium constant
Chemical kinetics
Open lessonWhere
- v
- instantaneous rate, mol/(L·s)
- a
- coefficient of A in the equation (so the rate is the same for every species)
- k
- rate constant; depends only on temperature and catalyst
- m, n
- orders with respect to A and B; overall order m + n
Where
- [A]₀, [A]
- initial concentration and concentration at time t, mol/L
- k
- first-order rate constant, s⁻¹ (or h⁻¹, yr⁻¹)
- t½
- half-life
First-order reactions
Where
- A
- pre-exponential factor (collision frequency and orientation)
- Eₐ
- activation energy, J/mol
- T₁, T₂
- two temperatures, K
Taking logs: ln k = ln A − Eₐ / (RT); a plot of ln k against 1/T is a straight line with slope −Eₐ / R
Acid–base equilibria
Open lessonWhere
- Kw
- ion product of water (depends on temperature)
- [H⁺], [OH⁻]
- molar concentrations of the ions, mol/L
Where
- Ka, Kb
- acid and base dissociation constants; pKa = −log Ka
- C
- initial concentration of the acid, mol/L
- α
- degree of dissociation (Ostwald's dilution law)
Valid when α < 5%; for bases write the same with Kb and [OH⁻]
Where
- [A⁻]
- concentration of the conjugate base (the salt)
- [HA]
- concentration of the weak acid
The Henderson–Hasselbalch equation; a buffer works best within pH ≈ pKa ± 1
Organic reaction mechanisms
Open lessonWhere
- RX
- the substrate, a haloalkane
- Nu⁻
- the nucleophile
The numbers give the molecularity: 2 bimolecular, 1 unimolecular
Bromination and nitration of benzene; the electrophiles are Br⁺ and NO₂⁺ (HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻)
Biochemistry basics
Open lessonPhotosynthesis (light, chlorophyll) and respiration — the same reaction in two directions
Where
- v
- initial rate of the enzyme reaction
- Vmax
- maximum rate, when all enzyme is saturated with substrate
- Km
- Michaelis constant: the [S] at which v = Vmax / 2; a small Km means high affinity