Work, energy and power

Learn about mechanical work, kinetic and potential energy, conservation of energy and power through worked examples.

  • Grades 7 and 8
  • 16 min
  • 10 questions
  • Lesson 13 of 44

In this lesson you will learn

  • Calculate mechanical work from force and distance
  • Find kinetic and potential energy
  • Apply the law of conservation of energy to problems
  • Calculate power and explain what a watt means

Elvin carries a heavy bag up the stairs to the third floor, while his neighbour takes an identical bag up in the lift. Both do the same amount of work, but the lift does it faster. In physics this difference is described precisely by the ideas of work, energy and power.

Mechanical work

Mechanical work is done when a force moves an object in the direction of the force. Work equals force multiplied by distance moved. The unit of work is the joule (J): 1 J = 1 N · 1 m.

W = F · s

Where

F
force in the direction of motion, in N
s
distance moved in the direction of the force, in m

W — work done, in joules (J)

Simple explanation

Put simply, work = how hard you push × how far the object moves in the direction of the push. 1 J is a small amount of work: lifting a 100 g apple by 1 m takes about 1 J. Make the distance twice as long and the work doubles.

A shopping trolley

Problem

Leyla pushes a shopping trolley straight ahead with a force of 20 N, and the trolley moves 15 m. How much work does she do? How much would it be if she pushed it 30 m?

Show solutionHide solution

Solution

W = F · s = 20 N · 15 m = 300 J.
Twice the distance means twice the work: 20 N · 30 m = 600 J.

Example 1: lifting a bag onto a shelf

Problem

A 10 kg bag is lifted steadily from the floor onto a shelf 1.5 m high. How much work is done? (g = 10 N/kg)

Show solutionHide solution

Solution

The force needed equals the force of gravity: F = m · g = 10 · 10 = 100 N.
W = F · s = 100 N · 1.5 m = 150 J.
Simple explanation
SituationMechanical workWhy?
you lift a bag from the floor onto a tableyesthe force points up, and the bag moves up
you hold a heavy bag stillnothe bag does not move (s = 0)
you carry the bag along a level path at a steady speedyour holding force does nonethe force points up, but the motion is horizontal
you push against a wallnothe wall does not move
you kick a ballyesyour foot pushes the ball over a short distance in the direction of the push
A short rule: force + motion in the same direction = work.
Going deeper

If the force makes an angle α with the direction of motion, only its component along the motion, F · cos α, does work. At α = 90° the work is zero (the bag case above), and for α > 90° it is negative: the work of friction, for example, is negative, because friction takes energy away from the body. If the force changes along the way, the work equals the area under the F–s graph: stretching a spring by x takes F = kx, the area is a triangle and W = kx² / 2.

W = F · s · cos α

Where

α
angle between the force and the displacement

Example: Murad pulls a sled with a force of 50 N by a rope at 60° to the horizontal, and the sled moves 10 m. W = 50 · 10 · cos 60° = 50 · 10 · 0.5 = 250 J — half of the 500 J a horizontal pull would give.

Sign up free to keep reading

The rest of the lesson, the quiz and your notes open with an Educora account. Signing up takes a minute, and your progress is saved on all your devices.

Kinetic and potential energy

EnergyDefinition

A physical quantity that shows an object's ability to do work. Like work, energy is measured in joules.

Ek = m · v² / 2Ek = m · v² / 2

Where

Ek
kinetic energy — energy of motion, in J
m
mass, in kg
v
speed, in m/s
Ep = m · g · h

Where

Ep
potential energy of an object at height h above the ground, in J
h
height, in m
Simple explanation

Energy is an object's store of ability to do work. A rolling ball can hit another ball and set it moving — it has kinetic energy. A raised hammer can drive in a nail when it falls — it has potential energy. Kinetic energy depends very strongly on speed: twice the speed gives 2 · 2 = 4 times the energy, three times the speed 3 · 3 = 9 times. Potential energy is simply proportional to height: twice the height, twice the energy.

Speed vEk = m · v² / 2, m = 2 kg
1 m/s1 J
2 m/s4 J — 4 times more
3 m/s9 J — 9 times more

Example 2: a ball

Problem

A 0.5 kg ball rolls at 4 m/s. What is its kinetic energy? If the same ball were resting on top of a cupboard 2 m high, what would its potential energy be? (g = 10 N/kg)

Show solutionHide solution

Solution

Ek = m · v² / 2 = 0.5 · 4² / 2 = 0.5 · 16 / 2 = 4 J.
Ep = m · g · h = 0.5 · 10 · 2 = 10 J.
So the ball on the cupboard stores more energy than the rolling ball has.
Going deeper

Where does Ek = m · v² / 2 come from? Let a constant force F act on a body at rest over a distance s. By Newton's second law a = F / m, and in uniformly accelerated motion v² = 2as. So the work done is W = F · s = m · a · s = m · v² / 2. In general the work–energy theorem holds: the total work of all the forces on a body equals the change in its kinetic energy. The zero level of potential energy is our own choice (the floor, a table, the ground): only the change in Ep has a meaning, so Ep can even be negative.

W = ΔEk = m · v₂² / 2 − m · v₁² / 2W = ΔEk = m · v₂² / 2 − m · v₁² / 2

The work–energy theorem: W is the total work of all the forces acting on the body.

Conservation of energy

Energy cannot be created or destroyed; it only changes from one form to another or passes from one object to another. The potential energy of a falling apple turns into kinetic energy. Without friction the total mechanical energy Ek + Ep stays constant; with friction, part of it turns into internal energy — heat.

Simple explanation

Energy is never created or destroyed — it only changes from one form to another or passes from one object to another. Watch a falling ball: at the top all its energy is potential; as it falls, the potential energy decreases and the kinetic energy grows by exactly the same amount. The sum — the total mechanical energy Ek + Ep — stays the same. With friction or air resistance, part of the energy turns into heat (internal energy): the mechanical energy decreases, but the total energy is still conserved.

Height hEp = m · g · hEkEk + Ep
5 m100 J0100 J
2.5 m50 J50 J100 J
0 m0100 J100 J
A 2 kg ball falls from 5 m (g = 10 N/kg, no air resistance). At the ground Ek = 100 J, so v² = 2 · 100 / 2 = 100 and v = 10 m/s.

Example 3: a falling apple

Problem

A 0.2 kg apple falls from a branch 5 m high. Ignoring air resistance, how fast is it moving when it reaches the ground? (g = 10 N/kg)

Show solutionHide solution

Solution

At the top: Ep = m · g · h = 0.2 · 10 · 5 = 10 J, Ek = 0.
At the ground all the potential energy has become kinetic: m · v² / 2 = 10 J.
v² = 2 · 10 J / 0.2 kg = 100, so v = 10 m/s.
Note that the answer does not depend on the mass: v = √(2 · g · h).
Going deeper

A sled slides down a hill

Problem

Leyla on her sled (total mass 40 kg) slides from rest down a hill 5 m high and reaches 6 m/s at the bottom. How much mechanical energy turned into heat? If the slope is 20 m long, what is the average friction force? (g = 10 N/kg)

Show solutionHide solution

Solution

At the top: Ep = m · g · h = 40 · 10 · 5 = 2000 J, Ek = 0.
At the bottom: Ek = 40 · 6² / 2 = 720 J, Ep = 0.
Turned into heat: 2000 − 720 = 1280 J (64%).
Friction took this energy away: F · s = 1280 J → F = 1280 / 20 = 64 N.
Without friction Leyla would arrive at √(2 · 10 · 5) = 10 m/s.

Interactive

Loading simulation…
At the highest point of the swing the potential energy is greatest; at the lowest point the kinetic energy is greatest. Energy changes form, but the total stays the same.

Power

Power tells you how quickly work is done: it is the work done per unit time. The unit of power is the watt (W): 1 W = 1 J/s. The power of machines is often given in kilowatts (kW).

P = W / tP = W / t

Where

t
time taken, in s

P — power, in watts (W); W — work done, in J

Simple explanation

Example 4: stairs and lift

Problem

Elvin, who has a mass of 60 kg, runs up stairs to a height of 6 m in 12 s. Find the work he does and his power. If a lift raised him to the same height in 6 s, what would the lift's power be? (g = 10 N/kg)

Show solutionHide solution

Solution

W = m · g · h = 60 · 10 · 6 = 3600 J.
Elvin's power: P = W / t = 3600 J / 12 s = 300 W.
The lift's power: P = 3600 J / 6 s = 600 W — the same work done twice as fast means twice the power.
Going deeper

The power of a moving machine can also be written through its speed: in a time Δt the force does work W = F · Δs, so P = W / Δt = F · Δs / Δt = F · v. In steady motion the driving force equals the resistance forces. That is why the engine's maximum power also limits the top speed, and uphill, where the resistance grows, the same power gives a lower speed — the driver shifts to a lower gear.

P = F · v

Example: an engine delivers 60 kW of useful power to the wheels, and at top speed the resistance to motion is 2000 N. vmax = P / F = 60 000 / 2000 = 30 m/s = 108 km/h.

Interactive

Loading simulation…
The lesson’s numbers are set, with g = 10 m/s². The work formula holds Murad’s sled: F = 50 N, s = 10 m, α = 60° → W = 250 J; turn α up to 90° and the work becomes zero, beyond 90° it is negative. For kinetic energy the Ek–v graph is a parabola and the Ek–v² graph a straight line (the ball of Example 2: 4 J). v = √(2 · g · h) is the apple of Example 3: falling 5 m, it reaches 10 m/s. P = W / t holds Example 4 (Elvin, 300 W); type t = 6 s to get the lift’s 600 W. In P = F · v choose v as the unknown: a 60 kW engine against 2000 N of resistance reaches 30 m/s.
Going deeper

Energy conservation is one of the most general laws of physics. Its deep reason is a symmetry of time: the laws of physics are the same yesterday, today and tomorrow, and the mathematician Emmy Noether proved that this symmetry leads to the conservation of energy. That is why a “perpetual motion machine” — one that does work without taking in energy — is impossible, and no machine can have an efficiency above 100%; because of friction, real machines always stay below 100%.

Remember

  • Mechanical work: W = F · s, measured in joules (1 J = 1 N · m). No movement means no work.
  • Kinetic energy Ek = m · v² / 2; potential energy Ep = m · g · h.
  • Energy is never created or destroyed; it only changes from one form to another.
  • Power P = W / t, measured in watts (1 W = 1 J/s).
Spotted a mistake or something inaccurate in this lesson?

Check yourself

10 questions. Every correct answer earns XP.

Question 1 / 10

Question 1 / 10. What is the SI unit of work?