Why is a door easy to push at the handle but hard to push near the hinges? Why does a figure skater spin faster when she pulls in her arms? Why do a solid ball and a hoop released on the same slope reach the bottom at different times? Rotational dynamics of rigid bodies answers all three.
Torque and moment of inertia
Where
- τ
- torque (a vector along the rotation axis), in N · m
- r
- position vector from the axis to the point where the force acts, in m
- d
- lever arm — shortest distance from the axis to the line of action of the force, in m
In translation the measure of inertia is mass; in rotation this role is played by the moment of inertia. It depends not only on the mass but on how the mass is distributed about the axis: I = ∑ mᵢ rᵢ² = ∫ r² dm. For example, for a thin rod of length L about its centre, dm = (m/L) dx and I = ∫ x² (m/L) dx (from −L/2 to L/2) = mL²/12.
| Body (axis) | Moment of inertia |
|---|---|
| Thin ring or hollow cylinder (symmetry axis) | mR² |
| Solid cylinder or disc (symmetry axis) | mR²/2 |
| Solid sphere (axis through centre) | 2mR²/5 |
| Thin spherical shell (axis through centre) | 2mR²/3 |
| Thin rod (about its centre) | mL²/12 |
| Thin rod (about one end) | mL²/3 |
Where
- Ic
- moment of inertia about a parallel axis through the centre of mass, in kg · m²
- a
- distance between the two axes, in m
Parallel-axis (Steiner) theorem. Check: for the rod, mL²/12 + m(L/2)² = mL²/3 — the value in the table.
Newton's second law for rotation
Let a tangential force Fᵢ act on a point mass mᵢ at distance rᵢ from the axis. Then Fᵢ = mᵢ · aᵢ = mᵢ · rᵢ · α; multiplying both sides by rᵢ gives τᵢ = mᵢ rᵢ² · α. Summing over all points (the torques of internal forces cancel in pairs) gives τ = I · α.
Where
- I
- moment of inertia, in kg · m²
- α
- angular acceleration, in rad/s²
- ω
- angular velocity, in rad/s
Example 1: a bucket in a well
Problem
A 5 kg bucket hangs from a rope wound round a solid cylindrical drum of mass 10 kg and radius 0.2 m. The drum turns without friction, and the bucket is released. Find the bucket's acceleration, the rope tension and the drum's angular acceleration (g = 9.8 m/s²).
Show solutionHide solution
Solution
Drum: T · R = I · α = (MR²/2) · (a/R) → T = Ma/2.
Adding: mg = (m + M/2) · a → a = 5 · 9.8 / (5 + 5) = 4.9 m/s².
T = 10 · 4.9 / 2 = 24.5 N, α = a / R = 24.5 rad/s².
Check: as M → 0, a → g (free fall); as M → ∞, a → 0.
Where
- W
- work done by a torque during rotation, in J
- P
- power, in W
- E
- rotational kinetic energy, in J
Example 2: engine power
Problem
A car engine produces a torque of 200 N · m at 3000 revolutions per minute. Find its power.
Show solutionHide solution
Solution
P = τ · ω = 200 · 314 ≈ 62.8 kW.
Angular momentum and its conservation
Where
- L
- angular momentum, in kg · m²/s
If the external torque is zero, L = const: I₁ω₁ = I₂ω₂.
Example 3: a spinning skater
Problem
With arms stretched out, a skater has a moment of inertia of 3.5 kg · m² and spins at 1 revolution per second. Pulling her arms in reduces it to 1.0 kg · m². Find the new rate of rotation. How does the kinetic energy change?
Show solutionHide solution
Solution
f₂ = f₁ · I₁ / I₂ = 1 · 3.5 / 1.0 = 3.5 rev/s.
ω₁ = 2π rad/s: E₁ = 3.5 · (2π)² / 2 ≈ 69 J; ω₂ = 7π rad/s: E₂ = 1.0 · (7π)² / 2 ≈ 242 J.
The energy grows 3.5 times — that is the work her muscles do pulling the arms in. Angular momentum is conserved; kinetic energy is not.
Interactive
Rolling without slipping
When a body rolls without slipping, its contact point is momentarily at rest, so v = ωR. The kinetic energy has two parts: E = mv²/2 + Iω²/2. Writing I = k · mR² gives E = (1 + k) · mv²/2. Static friction does no work because its point of application does not move. For a body rolling down a slope of height h, mgh = (1 + k) · mv²/2.
Where
- k
- I / (mR²): sphere 2/5, cylinder 1/2, hoop 1; 0 for a block sliding without friction
- θ
- angle of the slope
The answer depends on neither mass nor radius — only on the shape (k).
Example 4: a ball, a hoop and a block of ice
Problem
A solid ball, a hoop and a block of ice sliding without friction all descend from a height of 1.4 m. Find the speed of each at the bottom.
Show solutionHide solution
Solution
Ice (k = 0): v = √27.44 ≈ 5.24 m/s.
Ball (k = 0.4): v = √(27.44 / 1.4) = √19.6 ≈ 4.43 m/s.
Hoop (k = 1): v = √(27.44 / 2) ≈ 3.70 m/s.
The hoop is slowest: half of its energy goes into rotation. The ice wins the race, followed by the ball.
Interactive
Remember
- Torque τ = r × F, with magnitude F · d (d is the lever arm).
- Moment of inertia I = ∫ r² dm depends on the axis; parallel-axis theorem: I = Ic + ma².
- Newton's second law for rotation τ = Iα; angular momentum L = Iω, dL/dt = τ.
- With zero external torque, I₁ω₁ = I₂ω₂.
- Rolling: v = ωR, E = (1 + k)mv²/2, a = g sin θ / (1 + k).